Page 1 of 1
Another controller problem
Posted: Sat May 06, 2006 5:40 pm
by Sonic a Hedgehog
I am using a playstation 2 control pad on my PC. The controller works with meka and the latest PC games. However in ccs64 I cannot get it to work. When I go to the callibration screen the emulator picks up the button presses but I cannot define the button setup for gameplay. When I try to change a button in the joystick keyset it does not pick up my button presses. Any help? I will look in some other topics for help too. I will reply when I get things working.
Posted: Sun May 07, 2006 2:14 am
by Laffer
This is the same problem I have with my joystick.. I cannot define what buttons to use and it's very awkward to use the preset button as the fire button
Posted: Sun May 07, 2006 3:14 pm
by Sonic a Hedgehog
Laffer wrote:This is the same problem I have with my joystick.. I cannot define what buttons to use and it's very awkward to use the preset button as the fire button
Weard! Just got my controller working. I adjusted the calibration a bit and set up joystick adapter port 1 to both controler ports. I didnt touch the define keyset options. My left and up triggers are both set to 10% while the right and down triggers are set to 80%. Dont know how this worked though.